OBD-200 is an intelligent on-board diagnostic device compatible with cars, it’s plug-and-play technology, supports to read diagnostic info from vehicle ECU and capture location data, then send them to backend server via real-time remote diagnostic and tracking purpose.
- Features
- Standard OBD II
- Support GSM/GPRS
- Support Bluetooth (Optional)
- Plug & Play technology
- Support TCP/UDP/FTP/HTTP/MQTT
- Support Main server and backup server
- Support GPS/BDS/AGPS/LBS Located
- Industrial class components with high quality
- Comprehensive data collection and analysis, including diagnostic data, location data and driving behavior data
- Functions
- Real-Time tracking
- Mileage statistic
- Fuel consumption statistic.
- Read diagnostic data, including vehicle speed, RPM, ECT etc.
- Read diagnostic trouble code
- Clean diagnostic trouble code
- Read vehicle VIN code
- Vehicle checkup
- Remote engine cut (Optional)
- Upload trip report
- Data Encryption
- RFID (Optional)
- Driving behavior monitoring, including speeding, hard acceleration, hard deceleration, quick lane change, sharp turn, collision etc.
- 2M flash memory, Up to 16,000 GPS data storage
- Data reporting according to time interval, GPS data will re-upload via angle automatically when at the turning place.
- Upload Ignition on/off report
- Vehicle battery monitor
- TPMS Monitoring (Optional)
- Base station ID report (when no GPS signal)
- Internal battery for unplug notification
- Alarms and events
- Power On
- Power Off
- Acc On
- Acc Off
- Speeding
- Low Voltage
- OBD MIL Status
- Geo-fence
- High Coolant Temperature
- High RPM
- Fatigue Driving
- Emergency (Optional)
- Long Time parking when ACC ON
- Acceleration
- Deceleration
- Collision
- Vibration
- Sharp turn
- Quick lane change
- Idling
- OTA FW update
- Application
- Fleet management
- Car service shop
- UBI Solution
- Car rental
- ELD Solution
- ODM/OEM
- Technical Specification
Mechanical |
Size |
60*mm*47mm*26mm |
Weight |
98g |
Mould |
ABS Plastic |
Interface |
OBD interface: 16 pin standard OBD II
Configuration interface: Micro-USB |
Data transmission |
Bluetooth |
Positioning method |
GPS/BDS/A-GPS/LBS |
Storage |
2MB FLASH, up to 16,000 GPS data storage |
OBD protocol |
ISO 9141-2
ISO 14230-2
ISO 15765-2
ISO 15765-4
ISO 118981
SAE J1939 |
Power |
Working Voltage |
9-36VDC |
Working Current |
Max.: <68mA@13.8VDC
Average: <50mA@13.8VDC
Sleep mode: <10mA@12VDC |
Backup battery |
170mA Li-battery |
GPS |
Channels: 50
Sensitivity: -159dBm
Accuracy: 5m CEP Time to first fix:
Cold start: <30s (typ.)
Warm start: <30s (typ.)
Hot start: <1s (typ.) |
GSM |
GSM/GPRS:850/900/1800/1900Mhz |
Bluetooth (Optional) |
Version: Ver 4.0
Frequency Bands: 2.4GHZ
Work mode: Slave
Antenna: Internal |
6 axis Accelerometer |
G-Sensor+Gyro |
LED Indication |
GPS/GSM/OBD indication |
Antenna |
GSM |
Internal |
GPS |
Internal |
Bluetooth |
Internal |
Accessories |
Configuration cable
OBD II extension cable
Power Cable |
Environment |
Working Temperature |
-30℃ ~ +80℃ |
Storage Temperature |
-40℃ ~ +85℃ |
Humidity |
5%~95%(no frog) |